DD Free Dish Set Top Box Setting ? – Gsat-15 @ 93.5°E

DD Free Dish Strong Frequency or Strong TP is 3810/V/29500 for Lnb Freq. (05150) and 11090/V/29500 for Lnb Freq. (09750) and (9750-10600). more detail given below-

DD Free is an Indian DTH service provider company which provides various TV and Radio channels for free, in which you are provided with Movies, Entertainment, News, Music and Cartoon channels. DD Free Dish set top box is a free to air satellite receiver which can be used to watch DD free dish, ABS2 and other free to air satellites channels,
The set top box which is used for DD free dish or free to air channel reception, free to air set top box avalable in two types like mpeg2 and mpeg4 set top box, mpeg2 type set top box recieve only mpeg2/SD format channels, while mpeg4 set top boxes can receive channels in mpeg2/SD format and mpeg4/HD format channels from DD Free Free Dish or any other satellites which provide free to air channels.Free to air set top box complete setting given below-

MPEG-2 Set Top Box Setting-

mpeg2 set top box is use to receive mpeg2 or SD channels. In this type set top box use single LNB frequency like 05150KHz, 09750KHz, 10600KHz etc. mpeg2 type set top box have 22KHz Can also be set in ON or OFF condition, and there is no arrangement to set the dish with motor.

When you press menu button of remote in MPEG 2 set top box then you will get many option in tab like-

Add New Channels-

In this option, the satellite on which we want to dish, we can set the dish by entering the frequency of one of the channels of the satellite i.e. the strong transponder frequency, and it has to auto scan by going to the program setup of the signal, which all The channels are added to your set top box.

Remove Program-

By going to this option, we can delete any one or all TV or radio channels.

Move Program-

With this option, we can move any TV or channel from one place to another, for this, press the button of the remote once, select the channel, then take it to the place where it is to be moved and press the OK button of the remote again. The channel gets us moving on the spot.

Program Setup-

What is the option, we can set or change LNB frequency, update our set top box, update software, update auto scan channel.

Auto Scan-

What is the option to set new LNB frequency or automatically scan channel on existing LNB frequency keep LNB frequency 05150, 09750 or 10600KHz for DD free dish and search 22KHz and keep off and press OK button on remote.

TV Channel-

By going to this option, the TV channel is selected and brought to the TV program mode.

Radio Channel-

By going to this option, the radio channel is selected and brought to the radio program mode.

add new program to set dd free dish i know how to put strong frequency or select any exit channel and press signal button of remote, direct us to set dish using frequency, of dd free dish The angle is 93.5 east so the signal has to be brought by moving the dish slowly up and down, for DD free Dussehra the polarity of LNB has to be kept at 25 to 30 degrees in negative

MPEG-4 Set Top Box Setting-

The mpeg4 set top box is used to receive hd and non hd vele channels, this parker set top box has single lnb frequency and universal frequency use type like 05150 kHz, 09750 kHz, 10600 kHz and 09750 – 10600 KHz etc. Can Parker MPEG 4 set top have 22KHz on or off or auto condition, and also have arrangement to set dish with motor.

When you press menu button of remote in MPEG 4 set top box then you will get option in tab like-

Antenna Settings-

In antenna setting LNB frequency, trans frequency, symbol rate, 22KHz, polarity, desc switch has to be set, then signal trace has to be done on this frequency.

TP List-

Different Transponder Frequencies of Sabji Satellite can be added to list me, when this TP list does auto scanning then that tab is also added automatically, where any new one can be added and that TP can also be deleted

Single Satellite Search-

In single satellite search we can search channel on any one selected satellite by auto mode, this channel automatically gets added on selected satellite and TP also gets added in TP list.

Multi Satellite Search-

By Multi satellite search we can scan channels on selected different satellites simultaneously, this process is done when we have connected more than one LNB with set top box

Satellite List-

In this folder we can add different satellites, and also auto scan channels by selecting this satellite.

Apart from this, different features and options are available in different MPEG 4 set top boxes.

If you want get notifications for all new post, please press subscribe button and If you have any questions please write comment in comment box.